Engage Communication IP Tube DLT1 T1 Over IP Ethernet for Voice and Data

Description

Up for sale is
Engage Communication IP Tube DLT1 T1 Over IP Ethernet for Voice and Data
This sale includes one IP Tube, no power adapter or any other accessories
This unit has been used but still appears to be in good condition with minor scratches and scuff marks from normal wear and tear.
This item has been tested
Powered on via 12VDC from bench power supply. Connected via console at 9600 baud and was able to login using factory default root/none credentials. Both ports indicate "ENA" as enabled. Wired T1 loopback and connected to both T1 interface ports; link established. Configured LAN1 interface and LAN2 interface and connected to LAN's subnet; was able to ping router. Reset and loaded with default/generic two T1-ports config file. Console log below: login:root Welcome to the Engage Operations Interface Engage IP Tube - Version 26.72.81 IP Tube DLT1 Comp 413904# IP Tube DLT1 Comp 413904#sh s1 info Interface: S1 Port Type: T1 Protocol Type: IPTube Port State: Up Connection State: Connected Free Buffer Count: 101 IP Tube DLT1 Comp 413904#sh s2 info Interface: S2 Port Type: T1 Protocol Type: IPTube Port State: Up Connection State: Connected Free Buffer Count: 101 IP Tube DLT1 Comp 413904#ping 192.168.55.1 Pinging 192.168.55.1... Reply from 192.168.55.1 (time=0ms, received=1) Ping: Sent=1, Received=1, Average time=0ms Welcome to the Engage Operations Interface Engage IP Tube - Version 26.72.81 IPTube A#show config Host Name "IPTube A" Host Contact "No contact specified" Host Location "Site A" OurDNSServer IP Default-router 255.255.255.255 Telnet On UserTimeout Off SNMP Off SNMP Traps Off Interface LAN1 Autonegotiation On 8021q Off DHCPClient Off IP Address 192.168.1.50/24 IP Default-router Port On BroadcastRcv On IP State: RUNNING DDNS Off OurDomainName Interface LAN2 Autonegotiation On 8021q Off DHCPClient Off IP Address 192.168.2.50/24 IP Default-router Port Off BroadcastRcv On IP State: RUNNING DDNS Off OurDomainName Interface S1 Type T1 Protocol IPTube Tube Name Tube On Tube LoopCodeResponse Off Tube AcceptRLBRequest Off Tube Localloop Off Tube Remoteloop Off Tube Framing Transparent Tube ConfirmRemoteAlive On Tube LANPort LAN1 Tube 1 DynamicAddress Off Tube 1 Destination 192.168.1.51 Tube 1 UDPPORT 3175 Tube 1 TOS 0x30 Tube 1 Ethernet Arp On Tube 1 Ethernet Address 000000000000 Tube Buffers 5 Tube FPP 16 Tube Duplicates 0 Tube Compression Capability On Tube Compression Off T1 Mode Term T1 Data Normal T1 Clocking Internal T1 LBO CSU 0dB T1 Framing ESF T1 Coding B8ZS T1 IdleCharacter 0x7F T1 TxUnderrunAIS Off T1 Channels Full Interface S2 Type T1 Protocol IPTube Tube Name Tube On Tube LoopCodeResponse Off Tube AcceptRLBRequest Off Tube Localloop Off Tube Remoteloop Off Tube Framing Transparent Tube ConfirmRemoteAlive On Tube LANPort LAN1 Tube 1 DynamicAddress Off Tube 1 Destination 192.168.1.51 Tube 1 UDPPORT 3176 Tube 1 TOS 0x30 Tube 1 Ethernet Arp On Tube 1 Ethernet Address 000000000000 Tube Buffers 5 Tube FPP 16 Tube Duplicates 0 Tube Compression Capability On Tube Compression Off T1 Mode Term T1 Data Normal T1 Clocking Internal T1 LBO CSU 0dB T1 Framing ESF T1 Coding B8ZS T1 IdleCharacter 0x7F T1 TxUnderrunAIS Off T1 Channels Full
This unit measures to (INSERT MEASUREMENTS IF APPLICABLE).
This unit is compatible with (INSERT WHAT IT IS COMPATIBLE WITH IF APPLICABLE)
What you see in pictures is what you will receive. Additional accessories are not included. If we have a quantity of this item available, it might not be the exact item in pictures but it will be in similar condition.
For questions and inquiries, we are open Monday through Friday 8AM-5PM EST. We are closed on weekends and major US Holidays.
R2/RIOS Certification Conditions:
Potomac eCycle is certified to the R2/RIOS Standard which was created specifically for the Electronics Recycling industry to promote Environmental, Health and Safety. To comply with the standard we have implemented quality assurance plan and we categorize every item we sell into one of these R2/RIOS conditions.
R2 Ready for Reuse:
use effective test methods to confirm that all functions for equipment and components are working properly and ready for reuse, including properly configured with appropriate legally licensed software where required for operation of equipment and components, and device specific drivers within the product's hardware. This may include new items, new open box, new old stock, and items refurbished to close to factory specifications.
R2 Ready for Resale:
use effective test methods and testing equipment to confirm that the Key Functions of the equipment or components are working properly. This may include used items that have been fully tested but might lack software, have cosmetic issues, or have a part missing.
R2 Ready for Repair /
R2 Vintage Exception
:
this condition is strictly for items that are not functioning, and further, it is especially for items that have high numismatic value, such as old vintage radios that might not be operable, but in good enough cosmetic condition to restore.
R2 Exempt:
this condition is for items that do not contain any electronic components and therefore are exempt from the R2 Certification Conditions.